Power System Studies using SKM / ETAP software

Providing Short Circuit, Device Evaluation, Coordination, Arc-Flash, Load Flow, Motor Starting, Harmonics, Grounding and other Studies.

Reliability Studies

Conducting reliability studies of electrical systems based on IEEE/ANSI standard 493 using SKM software and providing recommendations and solutions to increase reliability and availability.

Arc-Flash labelling

Producing arc-flash label stickers based on arc-flash study using SKM or ETAP software.

Load Related Activities

Providing Load estimation and load shedding solutions. Performing Inrush current studies and providing solutions for staged start-ups.

Load Validation

Providing Load Validation study for Fuel Cell applications.

DC System Calculations:

DC Load Flow – Calculation of power, current and voltage drop profiles. Representation of constant kW, I, and Z, load types and evaluation of all loading conditions for duty cycle loads and AC emergency loads.

DC Short Circuit calculations based on ANSI standard 399 and 946 including the initial rate of rise and peak fault current.

Electrical Duct Bank Design

Complete design of underground duct banks including conductor sizing and consideration of heat accumulation.

Flicker Calculations

Analysis and solutions for electrical systems experiencing flicker.

Single phase System Studies

Full-range of studies for single phase systems including short circuit and load flow studies.

VFD application solutions

In water, Oil & Gas or any other applications.

UPS Sizing Calculations:

Battery Sizing based on IEEE standard 485 for sizing Lead-Acid batteries and IEEE standard 1115-2000 for sizing Nickel-Cadmium batteries. Determine the size of batteries to supply the worst case DC duty cycle loads and AC emergency loads.

Battery charger and inverter sizing based on IEEE Standards.

Multifunction Relay Programming & settings

For SEL, GE, Siemens, ABB, Basler or any other relay.

RCM (Reliability Centered Maintenance)

Providing cost effective solutions to reduce maintenance cost and meanwhile to increase reliability of electrical systems.

Relay settings calculations

For other than time-current based settings (i.e. Relays 78, 67, 27, 25, 59, 81, 79, etc.)


Designing Main and Secondary substations.

Complete Fire Alarm System Design

Complete design of fire alarm systems including schools, government and military facilities and hazardous locations.

Complete Mass Notification Design

Complete design of mass notification systems to serve stand-alone or campus-wide needs.

Complete Electrical System Design of Institutional or Industrial Projects

Complete design of electrical systems, including generation and distribution complete with generator, transformer, switchgear, switchboard, panelboard, conductor and raceway sizing as well as other components of a complete electrical system.

Complete or Partial Electrical System Design for Oil, Gas Petrochemical or Heavy Industry Projects.

Constructability and Code compliance Reviews

Reviewing project drawings and specifications for Constructability and/or code compliance and providing specific comments to resolve inconsistencies in short period of time.

As-built / Record Documentation

Up-dating facilities single line diagrams and preparing as-built drawings based on site conditions to allow for more increased effectiveness in record-keeping, efficiency of maintenance, and safer work conditions.

Cost Effective Drafting

Very Low-cost drafting in short period of time.

Lightning System Design

Including drawings and calculations all based on NFPA 780.


Calculations for luminosity and code compliance in both normal and emergency lighting conditions using the lighting system design & professional photometric calculation software.

PE Stamp

Checking Electrical drawings and stamping (PE Stamp) for California.

MEP Design

Lighting control & Dimming

Occupancy sensors

Daylighting control

Arc-Flash labelling - Producing arc-flash label stickers based on arc-flash study using SKM or ETAP software.